Ever thought about plugging the Ethernet cable into the wall? It might sound a bit strange, but if you have, then you aren’t alone. It might seem crazy at first glance, but there are some exotic scenarios in which an Ethernet cable can be plugged into the wall. However, without knowing how can you plug Ethernet into the wall safely, it can be risky. Here we will tell you how to do this without taking any risks.
Is It Possible to Plug Ethernet Into The Wall?
The short answer is yes.
The long answer is that it depends on the type of wall outlet you have. Most homes in the United States have a two-pronged wall outlet, while others have three prongs. A few homes may even have four prongs. With a two-pronged outlet, you can plug an Ethernet cable into the wall and have it work fine. A three-pronged outlet will also work, but only because it has a ground pin that can be used for grounding purposes when you’re using Ethernet cables for networking purposes.
On the other hand, four-pronged outlets are usually used for dryer outlets and should not be used with networking equipment because they don’t include a ground pin. To add more, older homes may not have any type of wall outlet at all, which means there’s no way to use an Ethernet cable unless you install one yourself or hire someone else to do it.
Though you can plug Ethernet into the wall with an Ethernet cable, it’s not a good idea. An Ethernet cable has two ends: one end fits into a port on your computer or router, and the other plugs into a network outlet. So, Ethernet cables are not designed to be plugged directly into a wall outlet. The wires inside them are too thick and stiff to fit into the narrow openings of typical electrical outlets. If you try to force Ethernet cables into electrical outlets, you can sometimes damage or break them.
Can You Put An Ethernet Port In A wall?
In a nutshell, yes; you can put an Ethernet port on a wall.
And, the long answer is that it’s probably not a good idea. Why not? Well, first of all, it will cut some excess amount of money from your pocket. If you’re going to spend hundreds or thousands of dollars on a network cable, why spend less than that on the hardware at either end? Second, it takes more time to install than simply running a cable across the room or down the hall. Besides, it requires drilling holes, installing connectors, and maybe even hiring an electrician to do some wiring.
Finally, for most people who need Ethernet connections in their homes and small businesses, installing them this way will require running two cables into every room. One for data and one for power. That’s not exactly convenient when all you want is a simple connection without worrying about power issues or whether there’s enough space behind your TV set to hide the cables.
How Do I Connect My Ethernet Router To The Wall?
The answer to this question depends on how your router is currently connected and whether you want to replace it or add it.
If your router is currently connected to the wall, but you want to replace it with a new one, you will have to disconnect it first. Be sure not to unplug your modem or any other device that is connected to the same outlet.
In case you are replacing your old router with a new one, simply connect the Ethernet cable from your modem to the WAN port of your new router. Then, connect an Ethernet cable from one of the LAN ports on your new router to one of the ports on your computer. The other end of this cable should be plugged into an open port on your computer or hub so that all of its devices can communicate with each other.
Why Is Ethernet Into The Wall Not Working?
We know that Ethernet is an easy way to connect your smart home devices and set up a home network. But if it’s not working, it can be frustrating. Here are some common reasons why Ethernet into the wall isn’t working:
- The wall socket has no power
When you’re trying to connect an Ethernet cable to a wall socket but no power is coming from the outlet, you’ll need to check for any tripped circuit breakers or blown fuses. If you can’t find any problems on your own, contact an electrician for help.
- The Ethernet cable is broken
In case you’re trying to use an Ethernet cable with a broken pin or stripped-out wire, then this can cause problems with connectivity and data speed. Before replacing the cable, make sure that it’s not just a single pin that’s damaged. In that case, you need to check each individual wire with a multimeter or a continuity tester.
FAQs (Frequently Asked Questions and Answers)
What Are The Pros Of Plugging Ethernet Into The Wall?
The advantages of plugging Ethernet into the wall include:
- Easier setup and installation
- More reliable connections
- Less hassle with cables
- Higher bandwidth speeds
However, these situations may vary according to your specific electric plugging setup and room arrangement. You should find out which works best for you.
What Are The Cons Of Plugging Ethernet Into The Wall?
There are a few cons to plugging Ethernet into the wall:
- One of the biggest problems is that it takes up space on your wall. If you want to use this method, you may need to move some things around to have enough room for all the wires.
- Another issue with this type of setup is that it can be difficult to hide all the wires. This can be especially problematic if you have minimal space in which to work.
- Another problem with plugging Ethernet into an outlet is that it can potentially leave you vulnerable to security threats like hacking or viruses. If someone can access your network through your Ethernet cord, they can steal personal information or even cause damage to your computer system.
In short, plugging Ethernet into a wall is unsuitable if you want a reliable connection. Because home networks tend to run on Wi-Fi or power line adapters. In other words, you can plug any Ethernet cable into Ethernet ports, but it will not work well because Ethernet was never meant for a home network.