Every piece of electronic appliance has a light in them. Not only table lamps, chandeliers, and globe lamps, but also refrigerators, ovens, and microwave ovens have them. This lets us see the inside of our working environment.
Most of the time the bulb used in them are G9 type. Which is of halogen build. And it runs only for 3000 hours. And you will need to change them after some time. This is where it gets tricky.
If you are not familiar with a G9 bulb, they are long 4-6 cm bulbs with metal prongs on the end. The prongs sit in place and have a cylindrical shape, and sit in a tight space.
This is why they are very hard to get and replace if you have thicker fingers. But how to remove the G9 bulb from the fixture and replace them? We are going to talk you through some simple steps today. And you won’t have a problem replacing them next time.
How to Remove G9 Bulb From Fixture
While G9 halogen bulbs are great to light up smaller spaces, they are hard to replace due to their design and size. Mostly they are cramped up in small places that are hard to reach. And when they sit there for a long time, dust and debris make them even tighter to reach.
But with the perfect equipment and process, you can remove them. Here are the things you will need to remove in one piece.
- Heat-resistant gloves.
- A replacement of the G9 bulb (Preferably LED).
Step 1: Turn off the Power
Start by turning off the light fixture. The best thing to do is to turn off your circuit breaker for safety measures. Don’t start pulling on the light bulb right away if it was turned on.
Step 2: Wait for the Light to Cool Down
If you have a halogen G9 bulb, wait for it to cool down. It will take at least 15 minutes before you can touch it. The safest way would be wearing a glove to take it out.
Step 3: Remove the Bulb
The glove is not only for your safety but also for the bulbs. Oils from our hands will stick to the new bulb replacement and draw down on its lifespan. So make sure you don’t touch the bulb with an empty hand.
Pull on the bulb firmly without twisting it. You might need to jiggle it a bit if it is tightly fixed in its place. And pull it smoothly. Do not apply pressure or the fixture will be damaged. It will come out in a few minutes.
Step 4: Install a New Bulb
When you have removed the old G9 bulb, place the new one you have with you. A subtle click of the prongs will let you know it is in place. If the prongs don’t make a sound, retrieve it and do the process again. Do not tamper with the placement of the prongs. It will damage the bulb.
Alternative for G9 Halogen Bulb for My Fixtures
G9 halogen bulbs have a very low lifespan of just 3,000 hours. The best way to get the bang for your buck is to invest in a LED G9 bulb. LED versions have 30,000 hours of life span which is a whole lot if you compare it with a halogen one.
Frequently Asked Questions
How do I remove a stuck halogen G9 bulb?
Wiggle around a little side by side without applying too much pressure. Because the fixture and socket are very fragile. If too much pressure is applied it will fall apart. And at the same time pull slightly with the wiggling. The halogen G9 bulb will come off smoothly.
Can you touch G9 LED bulbs?
Although LED bulbs don’t heat up as halogen or incandescent bulbs, it is not wise to touch a G9 LED bulb while it is on. You will not only get hurt from the little heat but also might damage the bulb. So the best thing to do is wear a glove to touch the bulb.
How to remove a light bulb that won’t unscrew?
There are insulated and silicon-plated pliers in the market that you will find to work on sophisticated objects like light bulbs. Use them to firmly grasp on the bulb and twist them a little from side to side. Do not overdo it or it will break the socket. Make sure the bulb is held firmly but not too tight. It might break the glass. Do not use any fluid on the fixture or it will damage your whole electrical system.
How do I change the bulb in my G9 oven?
To change the G9 bulb in your oven, locate the bulb and socket. Turn off the gas and electrical line from the breaker and main switch. Then take off the casing if there is any. And pull on the bulb wearing a glove. For more instructions, follow the manual that came with your oven. If you don’t have the manual handy, you can search for it online with the oven’s model number.
Conclusion
G9 bulbs are used in many household items. From ovens, and refrigerators, to cupboards and chandeliers. They are not so easy to reach because of their size. But using the right tools and methods, you can change them easily. Make sure you follow all the safety measures before you work with any electrical appliances.
