Putting up or replacing a light bulb is an easy task. You twist or unscrew the old one and put in a new one, and you’re done!
But what about installing a light fixture from scratch? That is a game changer. Surely it will test your DIY creativity.
It shouldn’t be that hard if you are putting up a light fixture on the ceiling with screws. The tricky part is drilling the hole for the recessed light fixture.
Today we are going to talk about all the aspects of what size hole saw for the light fixture you should use.
Recessed Light Fixture: What Size Hole Saw for Light Fixture Should You Use
Recessed light fixtures bring a more aesthetic vibe to your room. Be it your bedroom or office, these guys are amazing.
As they sit inside the ceiling, there is nothing bugging your eye with a lot of light. But putting them in place might puzzle you. As you cannot drill a hole that big and a hammer and chisel will bring down the roof.
That is why you use a hole saw instead. It is efficient, compact, and gets the job done smoothly.
You will find any size hole saw for light fixtures online and in any home depo. There are a few things you have to keep in mind though.
Size of the Fixture, Size of the Saw
There are a lot of sizes for the hole saw. It ranges from 9/12″ to 7-⅞”.
To get the right one, you have to measure your light fixtures’ bottom part rather than the upper case. Because the bottom part snuggles in the hole keeping it in place. And the surrounding of the fixture fit on top after you install the light.
So it is crucial that you measure it before ordering it online. And if you are confused, just take the light fixture with you to the store and get the right size by comparing.
Available Hole Saw for Light Fixtures in the Market
Hole saws generally fit right on your drill machine. Milwaukee, Blue Boar, Bosch, and Disston not only make drill machines but also hole saws that fit your needs.
Value for Money Hole Saws
You can check the following if you are looking for the best hole saws. They are known for being sturdy, and rugged and can be used time after time.
Milwaukee Electric Tool 49-56-0305 Recessed Light Hole Saw
- Best for abrasive surfaces.
- Dedicated for Recessed lights.
- Can work efficiently at 600RPM.
BOSCH HDG11 11-Piece Diamond Hole Saw Set
Vacuum-brazed diamond grit.
Less debris and operation heat due to segmented teeth.
Comes in more than one size.
Disston E0101682 Clamshelled RemGrit Carbide Grit Recessed Light Installation Kit
- Carbide cut edge makes it easy for tiles, drywall, and ceiling.
- Has more wear and tear than any other blade.
- Comes in 4,5 and 6 inches.
BOSCH HDG418 4-1/8 In. Diamond Hole Saw
- Faster cutting and less mess due to vacuum-brazed diamond grit.
- Available in a single head.
- Low cutting depth of 1 inch.
Southwire HOLE SAW
- Multiple object functionality (Aluminum, Wood, Plastic, Steel, Brass).
- Easy eject function.
- 1.5-inch depth cutting option.
Frequently Asked Questions
What size hole saw do I need for a lightbox?
For light boxes, recessed lights, or electrical outlets, you can get the right size by measuring the back of the lightbox or outlet. This will give you the exact size measurement for the hole saw you will need to buy.
What size hole saw do I need for a 6-inch can light?
For a 6-inch can light, a 6-⅜ inch hole saw is ideal. But to be on the safe side, measure the bottom of the can light with tape or take it with you to the store to get the hole saw.
What size hole saw for a 4-can light?
The ideal hole saw size for a 4-inch can light is 4-⅜. You can also take the can light’s diameter measurement to ensure you are getting the right product from the store.
How big should a ceiling fan hole be?
A ceiling fan hole should be at least 4 inches wide. Any less than that and it will be hard to install the bottom hanging brace support. And when the fan will start working, it might break the ceiling if it is less than 4 inches.
Conclusion
Investing in a good hole saw goes a long way. They are not only handy for light fixtures, but also for plumbing and woodwork. Without a quality hole saw, it would be hard to cut on a drywall, ceiling, or brick wall. At the same time, a better quality saw will hold its sharpness as well. But remember to check the size of your light fixture and buy the right one for you.
