Wall pack light also known as exterior building light is used to illuminate light outdoors. It’s necessary to install the lights to light up the driveway. Usually, you need to set two lights, this not only helps you but also the passersby. The process of installing the lights is easy and simple. It’s easier on a metal wall than installing the lights on a concrete wall.
Installing A Wall Pack Light On A Metal Building
You don’t need to be an expert to install a wall pack night. Even though electrical works are risky but you can do this on your own without the help of any electrician. To make the task interesting you can divide the work into steps. But you need to gather all the items you need to install a wall pack light on a metal wall.
Necessary Items For Installing Wall Pack Light
- Screws
- Screwdriver
- Drill machine
- Caulk
- Ruler
- Marker
- A seal for the wall pack light
- Switch
- A ladder
Steps For Installing Wall Pack Light On A Metal Building
At first, you’ll need to determine the place where you want to set the light. You need to place it high up to light the maximum area. It should be installed 12 to 25 ft. up from the ground. You can determine the place according to your choice. For that, you’ll need a ladder, ruler, and marker. Outline the spot where you want your wall pack light to be placed.
After drawing an outline you’ll need to dissemble the light using a screwdriver. Take off all the screws of the fixture and add the seal on the back. Now make holes according to the seal on the back of the light. You’ll find wires inside the fixture. Take out the wires from the big hole in the middle of the back of the light.
Next, you’ll need to set the light on the metal wall. To do so you have to drill holes on the spot just like the seal and wall pack light. Let the wires through from the big hole in the middle of the spot. Later, secure the light by caulking the exterior area of the bulb. Thus the bulb is installed on the wall but now it needs to be connected to a power source.
Maybe you’ll need some extra wires to connect the light to a switch and power source. You can place the switch wherever you want. Also, you have to secure the wires with a tape or tube. As all is set now try turning on and off the wall pack light a few times before packing up.
FAQs (Frequently Asked Questions)
How Do I Install A Light Fixture On A Metal Building?
To install a light fixture on a metal building you’ll need to dissemble the fixture first. Then add a seal on the back of the fixture. Drill on the back cover and the spot where you want to set the light. Now, reassemble the light in the position and connect the electrical wires. And you’ll be good to go. You don’t need to be a professional to do this simple task.
How Can I Install Wall Packs?
The wall packs need to be installed at 10 to 25 ft higher from the ground. Thus it’ll be able to serve its purpose of illumination. For installing it you’ll need to remove the lamp cover, make mounting holes, screw the lamp into the holes, connect wires, and reassemble the cover. Thus the installation will be completed.
How To Install A Flood Light On A Shed?
The function of a wall pack light and flood light is quite the same. Just the flood light is a more powerful illuminator and to install it you don’t need to dissemble and assemble the light. There will be a rubber seal and metal in the packaging of the flood light. You need to get the wires through the metal and seal it before connecting them to the electrical wires. Then tuck the wires in and set the light by screwing.
Conclusion
Drilling or mounting holes in a metal wall is simple than a cement wall. Though you have to be careful while making the holes. It’s better if you get a seal for the wall pack light beforehand. So at the time of making holes, you can open the seal and mark on the light and wall using that. Doing this will reduce the chances of making holes in the wrong spots.
Again while installing the light make sure that the electrical connection is cut off. This way you’ll be safe from any unwanted accidents due to electricity. Moreover, if you feel like you can’t do the installation by yourself then there is no need to force yourself. You can call for professional help and supervision.
