There is a need for furniture in every house. Certain furniture items, such as bookshelves and cabinets, sometimes must be fixed on the wall. Anchoring the furniture requires drilling holes in the wall and using screws.
If you move the furniture to another location, you will leave empty holes behind. In this article, we’ll learn how to anchor furniture without drilling. By the end of the article, you will have several ideas that will assist you in securing furniture without drilling.
The Best Way to Anchor Furniture to Walls Without Drilling
There are a few ways you can anchor furniture to walls without drilling. Some methods are most effective for attaching a bookshelf to a wall without screws. We always recommend using wall anchors or screws to secure any heavy object to the wall.
Measure the Furniture Properly
Consider where to attach the anchors: If you want to secure the straps to your furniture, you might want to place them in a hidden area. This way, no one will notice them blending into your furniture. Attaching the straps to the bottom of the table or chair is possible, keeping them out of view, and no one will even know they are in place.
Using Velcro straps beneath a small table with thin legs prevents it from sliding around. You can attach one side of Velcro to each leg by cutting it to the correct length. Then put one side of the same piece on top of the corresponding stick on the other end to put the two pieces together.
You can anchor bookcases by placing weighted bags at the bottom of the shelves. You can also use water-filled plastic bags instead of sand. Using Velcro straps, attach each bag with water to each stand. Depending on the frame, you can make water weights heavy or light.
Choosing the Proper Anchors
Use zip ties to stabilize your furniture if you need a longer, more vital anchor. It’s easy to use zip ties to attach things quickly and without causing any damage. First, knot the zip tie by wrapping the end through the loop and slipping the future through the circle of the zip tie two or three times.
Nails and screws are the best methods to hide Velcro straps or weights. You can anchor furniture without visible straps by placing screws directly into the legs of the furniture or using toggle bolts on larger pieces.
Place screws into your furniture by drilling holes slightly smaller than the screws and inserting them into the legs. Two screws should secure each portion of your table. If you want them to stand firmly upright, you can attach them with Velcro or sisal rope.
Here is How to use Anchors
Check the straps regularly when you anchor furniture with Velcro, water weights, or zip ties. The strap can stretch out over time, depending on how much pressure the furniture puts on it. You can fix this by simply tightening it up again.
Adding a tension rod between two pieces of furniture can add stability: Using a tension rod between two legs of a large portion of furniture, such as a sofa or king-sized bed, can increase strength. It will help stabilize the entire unit and prevent it from moving around as much. You need to place a piece of pipe inside each end of the rod before tightening the nuts.
Using tension rods prevents large furniture pieces from wobbling back and forth because they’re so easy to use. If you want an extra level of support, you can attach them to the underside of your cabinets or tables to have a strong base underneath. Don’t be afraid to think outside the box when using tension rods!
Anchors are crucial in securing your furniture. For example, a table can collapse if too much weight, resulting in items falling off. Also, the rods underneath may cause instabilities. Good quality anchors will ensure your furniture lasts for many years.
Attach with Heavy-Duty Glue
The standard method homeowners use to secure various objects is heavy-duty glue. Several glue brands work well on multiple surfaces, and you can easily find them at reputable stores like Home Depot. A strong adhesive such as urethane will ensure a secure attachment. In the proper application, urethane glue should stand up to moderate force. When moving furniture, some glue may remain attached to the furniture after using glue. As a precaution, the bookshelf should remain stable if you bump into it.
Decide where you want to place your furniture. Mark the wall with a light pencil before securing it. To clean the wall and furniture, soak a cloth in isopropyl alcohol and rub it on their surfaces. After 10 minutes, let it dry. Anchor the furniture to the wall by applying urethane glue along the backside. Put your bookshelf in place firmly using your guide. Give the glue plenty of time to bond by applying pressure for about one minute. While the glue cures, apply masking tape to add pressure.
Using the tape, fix the bookshelf to the wall and then continue to the other side. Allow the glue to cure for about 24 hours, then remove the tape.
QDOS Safety Anti-Tip Kit
To prevent accidents or damage to heavy furniture, Qdos Safety Anti-Tip Kits are patent-pending. However, the kit is relatively inexpensive and claims to support up to 200 pounds. In addition, the kit includes an adhesive and screws. If you choose to use them, you will need a much smaller hole for the brackets than for standard screws.
You can easily adjust the straps that anchor your furniture to the wall with the Qdos Safety Anti-Tip Kit. In addition, you can temporarily move your bookshelf to clean or grab items that have fallen behind due to its easy adjustment. Because of its durability and ease of use, this kit is ideal for kids’ rooms. In addition, it is easy to remove the equipment when you are ready to move furniture is easy.
Use self-Standing Furniture
Using self-standing furniture is your only option if none of the above methods work for you. Avoid using furniture that needs to be anchored to the wall, and opt for self-standing furniture. Due to its self-standing capability, it can handle much weight.
For example, you can get a self-standing bookshelf if you want to anchor your bookshelf without drilling. There is no need to arrive inside the wall since it can stand alone. Plus, you can store a lot of stuff inside it without worrying about it falling.
What Are The Reasons for Anchoring Furniture?
Anchoring furniture is a good idea because it ensures the furniture’s safety. It is impossible to keep the furniture balanced if it is not anchored. If it falls off, it can hurt you. It is also possible for furniture to fall off as a result of natural disasters such as earthquakes and intense windstorms, causing injuries and damage to the home. Further, your kids and pets can knock over your furniture, making it unstable and unbalanced.
Therefore, anchoring the furniture must maintain its position firmly and provide solid support. Doing so will prevent any injury or damage to the furniture. You can follow our guidelines above to anchor your furniture without drilling if you’re curious about how to do it.
Frequently Asked Questions
What is the best way to secure a shelf to the wall without drilling?
Without screws or studs, you can secure a bookshelf to the wall. If anchoring a bookshelf to the wall without a stud, we recommend heavy-duty tape, glue, Velcro strips, or a non-screw anti-slip kit.
Can I use something else instead of wall anchors?
A wall stud is an alternative to a large wall anchor for heavy-duty mounting. In that case, you can use a smaller gauge screw (or nail) without an anchor.
Is it necessary to attach furniture to the wall?
It is not necessary to attach furniture to the wall is unnecessary except for large and bulky items such as shelving. Examples are wardrobes, chests, drawers, and bookcases. These require you to secure them to the wall for safety reasons.
Conclusion
In addition to being a hassle, drilling holes in furniture isn’t always the easiest method of keeping it in place. You can anchor furniture without drilling. Keep your tables, chairs, and cabinets from moving around by using zip ties, Velcro straps, or even weights. If you consider a little creativity, you can prevent your furniture from being damaged. You can easily avoid damage to your walls and keep everything in place by preparing and understanding what anchors will work best for your furniture.
